- 3M
- Abbott
- All-Med
- Amsino
- Aplicare
- B. Braun
- Bard
- Baxter
- Becton Dickinson (BD)
- Brennen Medical
- Busse
- CME America
- Covidien
- Drive
- Duracell
- Dynarex
- Excelsior
- Exel
- EZ Care
- Hollywood Int
- ICU Medical
- Innovative Healthcare
- Kawasumi
- Kendall
- Kimberly Clark
- McKelor
- McKesson
Ambulatory Infusion Pumps from Medical Technology Resources
At Medical Technology Resources (MTR), we understand your need as a healthcare provider to have reliable medical equipment and technology. With efficient medical equipment at your disposal, you are able to spend more time focusing on the patient without having to worry about the quality of your supplies.
This is also true for ambulatory infusion pumps. Built to administer fluids and medication into a patient, it is vitally important that these infusion pumps deliver their products reliably. The features in these pumps help ensure the proper delivery of fluids, including MediGuard software that sets limits appropriate to patient weight.
Medical Technology Resources is a leading provider of ambulatory infusion pumps by ensuring that we offer only the highest quality pumps and supplies to companies. You’ll find that these products are lightweight, compact, portable and full of features that set them apart from the rest.
Browse through our available ambulatory infusion pumps like the Curlin 6000 Pump or the CADD Prizm below:
Abbott AIM Plus
The Abbott AimPlus is a single-channel infusion ambulatory pump intended for hospital and homecare use. Five types of programming options are available for flexible delivery of medications and nutritional fluids: TPN, Pain Management, Intermittent, Variable Time, and Continuous. The Abbott Aim Plus infuses in three units of delivery: millimeters, milligrams, and micrograms. KVO programming is available for TPN, Intermittent, and Variable Time therapies.
More Details
| Size: | 1.5” x 4” x 6” |
| Weight: | 16 oz. |
| System Accuracy: | +/- 5%, nominal |
| Air Sensitivity: | |
| HIGH: | Pump alarms at approximately 100 uL of air |
| LOW: | Pump alarms at approximately 300 uL of air |
| OFF: | If user has selected the option for air-eliminating filter in use, there is no alarm; if option for no air-eliminating filter in use selected, pump alarms at approximately 2 mL of air |
Bodyguard 323
3 Level Access Codes Designed to Prevent Accidental or Unauthorized Pump Program Changes
Deliver the widest range of care in one ambulatory infusion pump. Programmable for five therapy modes: Continuous, Intermittent, TPN, PCA and 25 pre-programmed steps.The BodyGuard 323 is light weight, easy-to-use and provides easy access to download infusion information.
More Details
| Total Infused Volume: | 0.1 to 9999 ml |
| Flow Rate: | 0.1 - 1200 ml/hr in 0.1ml increments / 1ml/hr increments |
| Accuracy: | ± 5% (pump and set combined) |
| KVO rate: | 1.0 to 5.0 ml/hr in 1 ml increments |
| Maximum Pressure: | 10 PSI (adjustable - high 10 PSI / normal 7.5 PSI /low 5 PSI) |
| Power Supply: | 110-240V AC, 50/60 Hz. (20W/0.12A) |
| Battery: | Li-ion 7.2V, 1450mA. (Rechargeable) |
| Battery life: | 15 hours at 125 ml/hr rate |
| Alarms: | End Program, Low Battery, End Battery, Lock Mode, Air-in-line, Down Occlusion, Door Open, Pump Unattended, System Malfunction (followed by error code), Missing Key |
| Dimensions and weight: | 112mm x 89mm x 32mm. (H/W/D), 290 gr. |
CADD Legacy PCA 6300
CADD-Legacy® PCA Ambulatory Infusion Pump, Model 6300 for continuous clinician-activated bolus and patient-activated bolus infusions.
More Details
| DeliveryModes: | Continuous, Demand Dose,Clinician Bolus |
| Delivery Routes: | Intravenous, Intra-arterial,Subcutaneous, Intraperitoneal, Epidural, Intrathecal |
| Programming: | |
| Programing Units: | ml, mg, mcg |
| Reservoir Volume: | 1 ml-9,999 ml or not in use |
| Continuous Rate: | 0-50ml/hr, 0-5000 mg/hr,0-25,000 mcg/hr |
| Dose Volume: | Demand Dose 0-9.9 mg, 0-4,950mcg Clinician Bolus 0-20 ml, 0-2,000mg, 0-10,000 mcg |
| Demand Dose Lockout: | 5 min-24 hr |
| Reporting: | |
| Reservoir Volume: | 0-9,999 ml (ml only) |
| Given (Volume Delivered): | 0-99,999.95 ml |
| Dose Given: | 0-999 |
| Doses Attempted: | 0-999 |
| Event Memory: | |
| Number of Events: | Last 1000 in pump's history |
| Download Capability: | Direct or Remote (modem)connection to PC |
| Software Compatibility: | CADD-DIPLOMAT PC CommunicationsSystem |
| Safety Features: | |
| Air-in-line Detector: | High, Low, Off |
| Upstream Occlusion Sensor: | On, Off |
| Downstream Occlusion Sensor: | On |
| Cassette Detector: | On |
| Lock Levels: | 3 |
| Other Specifications: | |
| Size: | 1.6 x 3.8 x 4.4 inches |
| Weight: | 13.8 oz (392 grams) |
| Power Source: | 2 AA Alkaline Batteries, ACAdapter |
| Accuracy: | ± 6%, nominal |
CADD Legacy Plus 6500
The CADD-Legacy® PLUS pump is for continuous and intermittent therapies. Includes pump, single-use 50-/100-ml pump pouch, 2 AA alkaline batteries, non-sterile demo cassette, operator's manual, patient guide and carrying case.
More Details
| Delivery Modes: | Continuous, Intermittent |
| Delivery Routes: | Intravenous, Intra-arterial, Subcutaneous, Intraperitoneal, Epidural, Intrathecal |
| Programming: | |
| Programing Units: | ml |
| Reservoir Volume: | 1 ml-9,999 ml or not in use |
| Continuous Rate: | .1-125 ml/hr |
| Intermittent Rate: | 0-125 ml/hr |
| KVO Rate: | 0-125 ml/hr |
| Dose Volume: | .1-1,000 ml |
| Dose Duration: | 1 min-24 hr |
| Dose Cycle: | 10 min-96 hr |
| Dose Starts in: | Immediate or 1 min-96 hr |
| Reporting: | |
| Reservoir Volume: | 0-9,999 ml |
| Given (Volume Delivered): | 0-99,999.95 ml |
| Dose Remaining: | 1 min-24 hr |
| Event Memory: | |
| Number of Events: | Last 1000 in pump's history |
| Download Capability: | Direct or Remote (modem) connection to PC |
| Software Compatibility: | CADD-DIPLOMAT PC Communications System |
| Safety Features: | |
| Air-in-line Detector: | High, Low, Off |
| Upstream Occlusion Sensor: | On, Off |
| Downstream Occlusion Sensor: | On |
| Cassette Detector: | On |
| Lock Levels: | 3 |
| Other Specifications: | |
| Size: | 1.6 x 3.8 x 4.4 in |
| Weight: | 13.8 oz (392 grams) |
| Power Source: | 2 AA Alkaline Batteries, AC Adapter |
| Accuracy: | ± 6%, nominal |
CADD Prizm 6100 & 6101
CADD Prizm 6100 and 6101 For continuous, clinician activated bolus, and patient activated bolus infusions.
More Details
| Recommended uses: | Intravenous, Intra-arterial, intraperitoneal, epidural, or sub-arachnoid infusion of PCA or Continuous |
| Rate parameters: | 0 - 30 ml/hr (or mg or m g equivalent) |
| Reservoir volume: | 1 - 9999 ml. programmable in 1 ml increments, displayed in 0.1 ml incr. |
| Demand dose (PCA): | 0 - 9.9 ml. in 0.1 ml increments (or mg or m g equivalent)delivers at approx. 125 ml/hr. |
| Battery Life: | 9-volt alkaline, 12 hours at 100 ml/hr approximate |
| Occlusion Pressure: | 18 ± 9 PSI |
| Accuracy: | ± 6 % |
| CADD Prizm VIP 6100/6101: | |
| Recommended uses: | Intravenous, Intra-arterial, intraperitoneal, epidural, or subarachnoid infusion of PCA, TPN, Continuous, or Intermittent medications. |
| Rate parameters: | Continuous mode: 0.1 - 350 ml/hr. in 0.1 ml increments from 0.1 - 100 ml/hr in 1 ml increments from 100 - 350 ml/hr (or mg or m g equivalent) PCA mode: 0 - 30 ml/hr (or mg or m g equivalent), TPN mode: 10.0 - 350 ml/hr in 10 ml increments |
| Battery Life: | 9-volt alkaline, 12 hours at 100 ml/hr approximate. For EPS specs, see PDCADDTPN |
| Occlusion Pressure: | 18 ± 9 PSI |
| Accuracy: | ± 6 % |
| Pump Resolution: | Standard reservoir or set = 0.050 ml/pump stroke nominal High volume set = 0.100 ml/pump stroke nominal |
| Dimensions: | 1.7" D x 4.1" W x 5.6" H excluding cassette |
| Weight: | 20 oz including 9 volt battery and empty 100 ml reservoir |
| Power Source: | 9 volt alkaline or lithium battery, External Power Source, or AC Adapter |
Curlin 4000 CMS
Web Special, Call for Pricing: 888.250.5699
The 4000 Clinical Management System (CMS) is a unique, multi-therapy ambulatory electronic infusion pump capable of Continuous, PCA, PCEA, Subcutaneous, TPN, Intermittent, and Variable modes.
More Details
| Pumping Mechanism: | Curvilinear Peristaltic Pumping Mechanism |
| Type of Device: | Five Therapy Ambulatory Electronic Infusion Pump, comprising: Continuous, PCA (IV, Epidural, Subcutaneous), TPN, Intermittent and Variable modes. |
| Pump Size: | 5.1" x 4.0" x 2.5 " |
| Weight: | 17.5 oz |
| Accuracy: | ± 5% Accuracy |
| Resolution of Flow: | 0.002 ml (2 microliters) |
| Flow Rates: | 0.1 ml to 400 ml/hr |
| Volume Limits: | 1.0 ml to 9,999 ml |
| KVO Rates: | 0.0 to 10 ml/hr |
| Power Sources: | 2 "C" Alkaline Batteries; AC and External Rechargeable Battery Pack |
| Operating Time (Full Charge Batteries): | Nominal 10 hrs at 400 ml/hr, Nominal 30 hrs at 125 ml/hr, Nominal 85 hrs at 2 ml/hr |
| Alarms: | Infusion Complete, Air-In-Line, High Upstream Pressure, Occlusion Upstream, Occlusion Downstream, Door Open, Set Not Installed, Unattended Pump, Replace Set, Empty Battery |
| Alerts: | Alert Messages Help The User In Correct Operations |
| Data Log: | 6000 events, Including Line Pressure, Volume Infused/Time |
Curlin 6000 CMS
The 6000 Clinical Management System (CMS) is a truly ambulatory multi-therapy electronic infusion device capable of Continuous, PCA, PCEA, Subcutaneous, TPN, Intermittent, and Variable modes.
More Details
| Pumping Mechanism: | Curvilinear Peristaltic Pumping Action |
| Type of Device: | Five therapy ambulatory electronic infusion pump, comprising of: Continuous mode, PCA (IV, epidural, subcutaneous) mode, TPN mode, Intermittent mode, Variable mode |
| Pump Size: | 5.1" x 4.0" x 2.5" |
| Weight: | 17.5 oz |
| Accuracy: | 5% Accuracy |
| Resolution of Flow: | 0.002 ml (2 microliters) |
| Flow Rates: | 0.1 ml to 400 ml/hr |
| Volume Limits: | 1.0 ml to 9,999 ml |
| KVO Rates: | 0.0 to 10 ml/hr |
| Power Sources: | 2 "C" alkaline batteries, AC, External rechargable battery pack |
| Operating Time (Full Battery Charge): | Nominal 10 hrs at 400 ml/hr, Nominal 30 hrs at 125 ml/hr, Nominal 85 hrs at 2 ml/hr |
| Alarms: | Infusion Complete, Air-in-line, High Upstream Pressure, Occlusion Upstream, Occulsion Downstream, Door Open, Set Not Installed, Unattended Pump, Replace Set, Empty Battery |
| Alerts: | Alert messages help the user in correct operations |
| Data Log: | 6000 events, including Line pressure, volume infused/time |
| Additional Comments: | Real-time Line Pressure, Shift Totals, On-screen Hourly Totals, Highly Visible Large Fronts, Quick Repeat Feature, Continuous Back-Light-On with AC Power, Titration In Coninuous and PCA Modes, Unused Therapies Can Be Locked Out, Four Access Levels For Security, On-line And Context Sensitive Help Screens, Data Interface Port, Printable History Log |
| Regulatory Approvals: | UL 2601-1 classified and CSA C22.2 No. 601.0; UL 544 listed and CSA C22.2 No. 125; EMC certified per EN 60601-1-2 and EN 60601-2-24 |
| Path Forward: | CMS Software Upgrades |
GemStar Infusion Pump
The GemStar line of products offers three models for I.V., arterial or epidural infusion for I.V. fluid, medications nutritional fluids and blood/blood products. The GemStar infusion pumps provide single channel administration of up to seven different therapies. These rugged units are built on lightweight aluminum frames protected with color-coded bumpers making them durable and easily recognized.
More Details
| Delivery Units: | Continuous and Pain Management |
| Delivery Rates: | Min: 0.1mL/hr, Max: 1000mL/hr |
| Programmable Volume: | 0.1mL, 9999.99mL |
| Programmable Bolus: | 0.1mL or 0.1mg or 1mcg |
| Net Weight: | 17 oz. |
| Power Requirements: | 90-260 VAC adapters, two AA disposable alkaline batteries, rechargeable battery pack |
All Rights Reserved.
